Nulon Coolant Green Long Life Pre-mix 5L Description
- Hybrid Additive Technology inhibits corrosion, freezing and boiling
- 5L bottle for complete coolant flushes
- Pre-mixed formula requires no mixing or preparation
- Protects cooling system for up to 5 years or 350,000km
Nulon Premium Long Life Pre-Mix Coolant - Green (LLTU) is a pre-diluted, ready to use 33.3% mix of Nulon Long Life Concentrated Coolant (LL) and 66.6% demineralised water. LLTU is formulated to be used in either of two ways:
Add as a top-up to any cooling system that contains Nulon Long Life Concentrated Coolant (LL). (Note: If a vehicle manufacturer specifically recommends a 50/50 mix, it will be necessary to use a 50/50 mix of Nulon LL and water. When using as a top-up, always remember that the coolant should be changed according to the amount of work the original coolant in the system has done.
Use as a complete fill product. This is particularly advantageous in areas where water is of poor quality, or is very hard, such as Perth and Adelaide.
All performance characteristics of Nulon Premium Long Life Pre-Mix Coolant - Green (LLTU) are exactly the same as for Nulon Long Life Concentrated Coolant (LL) when LL is mixed 1 part to 2 parts water.
Nulon Premium Long Life Pre-Mix Coolant - Green (LLTU) offers long-term cooling system protection for all motor vehicles. Nulon LLTU is based on Hybrid Additive Technology (HAT), which is a blend of organic and inorganic additives. The advantage of this product over conventional ethylene glycol type coolants is that the corrosion-inhibiting package has minimal depletion over an extended period of time. This means that maximum corrosion and anti-freeze/anti-boil protection are maintained until the fluid is replaced at the recommended 500,000 kilometres or 6 years (whichever comes first).
Nulon LLTU is to be used direct from the container and not diluted. Nulon LLTU protects for 6 years or 500,000km and is safe to use in all Commodores and Ford Falcons (including all V series Commodores and AU to BF Falcons).
Nulon LLTU is a low silicate formulation containing no nitrite, phosphate or amine. These chemicals are often used in conventional coolants and have limitations in performance, protection afforded, and vehicles to which they are suited. Nulon LLTU is guaranteed suitable for use in all vehicles where the manufacturer specifies anti-boil/anti-freeze coolant.
Nulon LLTU's formulation is approved by Ford Australia (ESE-M97B44-A specification) for initial fill in all Australian manufactured 6 and 8 cylinder vehicles. This specification is recommended by Ford for all in-warranty and post-warranty servicing of Ford vehicles where a glycol based coolant is required.
- 6 years or 500,000 km service life (whichever comes first)
- Guaranteed to suit every vehicle
- Provides optimum protection against corrosion of all metals in vehicle cooling systems
- Compatible with hoses and rubber fittings
- Expands operating temperature range of cooling systems (see details below)
- Eliminates the need for supplemental coolant additives (SCA) in diesel engines
- Reduces the incidence of nucleate or hot spot boiling
- Not aggressive to water pump seals as is often the case with silicate based coolants
- Performance of organic additive based inhibitors does not diminish with time
- Reduces inventory for fleet operators
|Product Notes||6 years or 500,000 km service life (whichever comes first). Guaranteed to suit every vehicle. Provides optimum protection against corrosion of all metals in vehicle cooling systems. Compatible with hoses and rubber fittings. Reduces hot-spot boiling.|
|Types||Coolants - Pre-mix|
|Warranty||Limited manufacturers warranty according to the installation and replacement instructions as given by Nulon and the manufacturer of your vehicle.|
We offer FREE shipping on all orders over $50 to metropolitan or regional addresses (excludes big and bulky items).
Orders of less than $50 and orders shipped to rural addresses are subject to a shipping fee that is calculated at checkout. See full shipping details here.
We offer 100% Fitment Guarantee, but if you choose to return an item we offer a generous 60 day returns policy with a full refund. See returns policy and fitment information here.
All products sold by Sparesbox are sold under the Manufacturer’s warranty and conditions from the date of purchase, unless otherwise stated on the item.
Warranty claims must meet certain criteria and be sent to Sparesbox with a receipt to be eligible for a refund. See full warranty claim criteria here.
- Australian Owned
- 100% Fitment Guarantee
- Genuine Quality Brands