StopTech Big Brake Kit - Fits Porsche 996/997 RWD Front ST-40 4-Piston Calipers 98-05 83.788.4700.71

Part Number: 83.788.4700.71
 Will this part fit?

Finance Available

Available for orders over $100. Info >
Zip Money
Up to 6 Months Interest Free. Info >

Free Delivery on Orders Over $50** Excludes delivery of bulky items and to remote areas.

StopTech Big Brake Kit - Fits Porsche 996/997 RWD Front ST-40 4-Piston Calipers 98-05 Description

  • 100% leak down and pressure tested to 2,500 PSI
  • 4 Piston Calipers uses standard FMSI D372 brake pad
  • Differential piston sizes minimize pad taper
  • Made of Squeeze Forged aluminum alloy
  • Dust boots are standard
StopTech Big Brake Kits improve aesthetics and exceed stock brake performance in three areas. First, larger rotors increase heat capacity. Second, improved brake cooling dissipates absorbed heat. Third, stiffer calipers and stainless steel lines reduce system compliance.

The key, however, is to increase heat capacity and reduce compliance without upsetting the stock front to rear brake torque ratio, also referred to as brake bias. Regardless of rotor diameter, brake pedal ratio, brake pad material, or number of pistons in your calipers, your maximum deceleration is limited every time by the tire to road interface. If the brake upgrade you select adds too much front brake torque (as many do), it will drastically shift the brake bias too far forward and reduce your car's ability to utilize the maximum traction of the tires at all four corners (even on ABS equipped cars), increasing stopping distances dramatically. In addition, too many pistons or pistons that are too large will make the brake pedal much more difficult to modulate, which limits a driver's control of brake input.

Advantages of StopTech Big Brake Kits over other brake upgrades:

- StopTech Balanced Brake Upgrades with optimum brake bias offer the shortest stopping distance with the best pedal feel
- StopTech offers the stiffest aftermarket calipers available, their patented bridge results in better clamping under hard braking and less pad taper
- StopTech's patented AeroRotors offer the best airflow available which results in better cooling, less fade and longer rotor and pad life
- StopTech Stainless Steel Brake Lines are resistant to expansion which offers better brake modulation and a firmer brake pedal
- StopTech Brake pads combine the benefits of premium street brake pads with aggressive friction formulas suitable for track day and autocross use.
- StopTech ST-40 - 4 Piston Calipers

StopTech's ST-40 calipers are manufactured using a squeeze-forging process at Sanyco, a 34-year old company that is CNS, QS 9000, and ISO 9002 certified. Mitsubishi, Volkswagen and Toyota are among their top customers. With squeeze forging, pressure is applied during cooling. This produces a beautifully finished, solid part, without porosity. StopTech does all finish machining (such as piston bores sized correctly for the application), assembly and test in California. Calipers that are cast without being squeeze forged can have major issues with porosity which can even cause calipers to leak. Dust boots are standard on StopTech calipers to keep the pistons clear of contamination and extend the service life of the calipers. Competitors calipers designed without dust boots require rebuilding every two years.

Advantages of StopTech's ST-40 - 4 Piston Caliper:

- Pistons sized to match brake kit to vehicle application
- ST-40 caliper uses standard FMSI D372 brake pad
- 100% leak down and pressure tested to 2,500 PSI
- Differential piston sizes minimize pad taper
- Made of Squeeze Forged aluminum alloy
- Dust boots are standard
- StopTech's Patented Caliper Bridge

Using finite element analysis (FEA) modeling software, StopTech has designed a bolt-in bridge strong enough to stop distortion without sacrificing cooling through the top of the caliper. The squeeze forged StopTech ST-40 caliper has the least flex of any tested aftermarket or OE caliper. The air channel in the bridge helps air flow through the retainer, resulting in better cooling.

The chart below shows the results of testing 25 leading caliper models by the major caliper companies. Each caliper was subjected to the same pressures and deflection was measured with a dial caliper. StopTech calipers were the stiffest caliper of the major brands tested.

Advantages of Stiffer Calipers:
Better performance with no vibration or noise
No radial pad taper
Better pedal feel
StopTech's Patented AeroRotors

StopTech's racing AeroRotors are cast at Pilenga S.p.A., the second largest rotor manufacturer in Europe. Pilenga is ISO9002 and Vision 2000 certified and has been casting brake rotors for over 50 years. StopTech developed a proprietary cast iron formula for the AeroRotors after extensive testing to ensure high durability under extreme use. To test rotor durability, StopTech rented the California Speedway and ran a heavily weighted down car with StopTech rotors on one side and a competitor's rotors on the other. In this test, StopTech rotors were approximately twice as durable as the competitor's rotors. StopTech has had several sets of rotors run entire 24 hour races on winning cars.

The ability to absorb and dissipate heat is essential to brake system performance. The patented StopTech AeroRotor features uniquely designed curved vanes with innovations on leading and trailing edges to optimize airflow through the rotor. This improved directional design minimizes turbulence and flows more air than any rotor tested. The result is up to 80% better airflow over original equipment rotors and 10-30% better airflow than directional vaned racing rotors currently available.

Advantages of StopTech AeroRotors:

- Enhanced durability for decreased lifetime costs
- Superior airflow for increased heat dissipation
- Consistent and predictable performance
- Extended rotor life
- Increased pad life
- Less fade

StopTech Stainless Steel Brake Lines

StopTech makes their own stainless steel brake lines in California from the highest quality parts available. StopTech brake lines consist of a Teflon® inner line that is covered with a layer of stainless steel woven braid. The Teflon tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid. The stainless steel braid provides support for the Teflon and the weave is extremely durable against incidental impact and abrasion. Lines feature a clear abrasion-resistant cover for maximum protection against chaffing and particle intrusion. Every fully assembled StopTech Stainless Steel Brake Line is tested to a pressure of 4,500 PSI. StopTech is a DOT (U.S. Department of Transportation) registered supplier of brake lines.

Advantages of StopTech Stainless Steel Brake Lines:

- StopTech Stainless Steel Brake Lines comply with TUV and FMVSS 106 safety standards
- StopTech is a registered brake line manufacturer with the United States DOT
- Shorter stopping distance through shortened reaction time
- Strain relief devices to reinforce end fittings
- Improved pedal feel and modulation
- Tested to 4,500 PSI
- StopTech Street Performance Brake Pads

StopTech ST-40 Big Brake Kits include StopTech Street Performance brake pads which are suitable for both street and light track use. StopTech Street Performance Brake Pads feature low dust, high initial response for cold stops, quiet operation, even pad wear and consistent pedal feel and performance. For more aggressive track use or race use, it is very important to select pads appropriate to the type of driving.

Advantages of StopTech Brake Pads:

- Wide operating temperature range improves stopping power hot or cold
- Consistent and predictable performance
- Excellent pad life
- Longer rotor life
- Reduced dust
- Low noise

PLEASE NOTE: StopTech Brakes are custom ordered and may take up to two weeks to dispatch.


Part Number83.788.4700.71
Warranty12 Month Manufacturers Warranty


We offer FREE shipping on all orders over $50 to metropolitan or regional addresses (excludes big and bulky items).

Orders of less than $50 and orders shipped to rural addresses are subject to a shipping fee that is calculated at checkout. See full shipping details here.


We offer 100% Fitment Guarantee, but if you choose to return an item we offer a generous 60 day returns policy with a full refund. See returns policy and fitment information here.


All products sold by Sparesbox are sold under the Manufacturer’s warranty and conditions from the date of purchase, unless otherwise stated on the item.

Warranty claims must meet certain criteria and be sent to Sparesbox with a receipt to be eligible for a refund. See full warranty claim criteria here.

  • Australian Owned
  • 100% Fitment Guarantee
  • Genuine Quality Brands

Share with...